![]() |
Korg EA1 Electribe
Classic Tweek Box: The EA-1 is a classic analog tweek box. You have full realtime control over many of the features required to create the most authentic, classic sounding analog leads and basses. As well as this it also incorporates a phrase sequencer to allow musical programming of created sounds |
![]()
| STEP OR
REALTIME: The Built in sequencer with the 16 pad keys makes it easy to program patterns from the sounds you create. Each pad key lights up so you can easily see what rhythm part is programmed to play. The pad keys can also be played as a pitched keyboard in either step or realtime |
AUDIO INPUT:
In addition to the 2 sounds you can program using the internal tone generators you can also take sound creation to a further step by with an audio input. Audio sources can be processed via the electribes internal filters and put in sync with patterns. |
| CONTROL AS AN
EXTERNAL MODULE: The Electribe A can also be controlled from an external sequencer, keyboard or sampler to function as an analog sound source or setup to control or be controlled by other hardware or computer based sequencers |
![]() |
| Build analog sounds by using the Electribe A's waveform, filter and effect knobs | (2 VCO + 1 VCF) x 2 parts | Create 2 part sequenced phrases using the 2 analog modelling tone generators |
| Record filter or effect knob movements in realtime using the motion sequence function | Sync the electribe to MIDI devices using tap tempo or MIDI clock, or tap in the beat and sync to a turntable or other non MIDI sound sources. | Input external sources into the Electribe and process them with it's resonant filter or effect knobs and then assign them to your sequence |
SPECIFICATION:
SOUND GENERATION: Analog modelling, 2 Parts, MEMORY: 256 patterns, 16 songs, EFFECTS: Delay (normal, motion sequence, tempo delay), SEQUENCER: (pattern) 64 steps maximum per part, motion sequence, 1 parameter per part, 64 events, (song) 256 patterns maximum per song, event recording 65,500 events maximum, INPUTS: Audio In, (Phono jack - Mono x 1), Input Impedance: 47 kOhms, OUTPUT: Part1/Mix, Part 2 (phono jack - mono x 2), headphones (phone jack), Maximum output level +7dbu (max), Output impedance: 1k-ohm, Sampling frequency 39.0625kHz, AD/DA conversion: 18 bit linear, MIDI: In, Out, Thru, DIMENSIONS: 300 x 222.5 x 53.4 mm, Weight: 1.25 Kg