Offers-Freebies-Latest Products ?

e-mail us!

Korg M3 Workstation Specification

Details provided by A&C Hamilton Pro Music dept 01772 722468 Preston Lancs

Overview
 
Synthesis Technology
 EDS (Enhanced Definition Synthesis)  
 MMT (Multi Modeling Technology) sound generator can be added by installing the optional EXB-RADIAS
 
Tone Generator
256 Mbyte (when converted to 16-bit linear format)
1,032 Multisamples
1,606 Drum Samples
 
Maximum Polyphony
120 voices, 120 oscillators max, single mode
60 voices, 120 oscillators max, double mode*
 
* The actual maximum polyphony will vary depending on oscillator settings such as stereo multisamples and velocity crossfading.
 
 
 
Program Structure (EDS)
 
Oscillator
OSC1 (Single), OSC1+2 (Double)
 
Stereo multisamples are supported
 
4 velocity zones per oscillator, with switching, crossfades and layers.
 
Filters
Four types of filter routing (single, serial, parallel, 24 dB)
 
Two multi-mode filters per voice (low pass, high pass, band pass, band reject)
 
Driver
Per-voice nonlinear driver and low boost
 
EQ
Three bands, with sweepable mid
 
Modulation
For each voice: two envelope generators (Filter & Amp)
 
Two LFOs
 
Two key tracking generators (Filter & Amp)
 
Two AMS mixers
 
Pitch EG
 
Common LFO
 
Two common key tracking generators
 
Combination Structure
 Up to sixteen timbres
 
For each Timbre: keyboard and velocity split/layer/crossfade
 
INT, OFF, EXT and EX2 MIDI status settings
 
3-band EQ with sweepable mid
 
Pitch/Transpose
 
Use OSC1, 2 or Both
 
Force Osc Mode (PRG, MONO, LEGATO, POLY)
 
Portamento and Bend range settings
 
Controller filters
 
Modifications to the program settings via the Tone Adjust function
 
Drum Kit Structure
 
Stereo and mono drum samples 4-way velocity switches with crossfades and adjustable crossfade shapes (Linear, Power, Layer)
 
Exclusive keygroups
 
Per key 3-band EQ, Drive, Lo Boost, filter and level offsets
 
Sampling
 
16-bit, linear, 48 kHz mono/stereo sampling
 
Resampling available (Open Sampling System)
 
64 Mbyte memory standard (expandable up to 320 Mbyte with EXB-M256 option)
 
Sampling time (RAM)
 
RAM1 (64 Mbytes standard) allows up to approximately 11 minutes 39 seconds of mono sampling or approximately 5 minutes 49 seconds of stereo sampling. 512 bytes are used by the system.
 
RAM2 (256 Mbytes when the EXB-M256 is installed) allows up to approximately 46 minutes 36 seconds of mono sampling or approximately 23 minutes 18 seconds of stereo sampling.
 
RAM1+RAM2 (Total 320 Mbytes) allows up to approximately 58 minutes 15 seconds of mono sampling or approximately 29 minutes 7 seconds of stereo sampling. (Continuous sampling across RAM1 and RAM2 is not possible.)
 
Sampling time (MEDIA)
 
Maximum sampling time to a USB storage device is a maximum of approximately 80 minutes for one sample file, for either mono or stereo. This occupies approximately 440 Mbytes for mono, or 879 Mbytes for stereo.
 
1,000 Multisamples, 4,000 Samples, 128 indexes per sample
 
Supports Korg format, AIFF, WAV, AKAI S1000/S3000 (with advanced Program conversion), SoundFont 2.0 reading
 
Sample directly from audio CDs (CD-DA)
Time Stretch, Time Slice, Crossfade Loop, and other editing features
 
Effects
 
5 Insert Effects (stereo in/out), 2 Master Effects (stereo in/out), 1 Total Effect (stereo in/out) are available simultaneously
 
2 effect control busses, 2 effect common LFOs
 
170 types (can be used for Insert/Master/Total.) Note: double-size effects cannot be used as a Total effect.
 
Effects Presets: Up to 32 per Effect
 
AUX bus: Two internal buses for sampling and routing audio to the EXB-RADIAS
 
3-band Track EQ (High, low, and sweepable mid band) Per Program in Program Mode, per Timbre in Combination mode (16 total), and per Track in Sequencer mode (16 total)
 
X-Y control
 
X-Y MODE
 The TouchView display can be used as an X-Y controller. Hold function provided.
X–Y MOTION function
 X–Y Control finger movements can be recorded in realtime, and memorized for each Program, Combination, or Song. 
Program mode
Oscillator volume, synth parameters, and effect parameters can be controlled. 
Combination, Sequencer modes
Timbre/track volume, synth parameters, and effect parameters can be controlled.
 
Sounds
 
Programs
 1,664 user locations, 640 preloaded (512 EDS+128 RADIAS) (with EXB-RADIAS option installed)
Combinations
 1,792 user locations, 384 preloaded
Drumkits
 144 user locations, 32 preloaded
GM
 256 GM2 programs, 9 GM2 drum kits
 
Sequencer
 
16-track MIDI sequencer with 480 ppq resolution
 
128 Songs, 20 Cue Lists, 210,000 notes (max)
 
Tempo: 40.00 – 300.00 BPM (1/100 resolution)
 
16 preset/16 user Template Songs
 
522 preset patterns, 100 user patterns (per Song)
 
Cue List function: 20 cue lists, Songs can be arranged consecutively or repeatedly in up to 99 steps, A cue list can be converted back into a song
 
Standard MIDI File (SMF) format 0 and 1 available
 
In-Track Sampling function
 
Auto Song Setup function (One Touch Record) for easily going from a Program or Combination into “record-ready” status
 
RPPR (Realtime Pattern Play/Recording)
 
A set of 100 patterns are available per Song
 
Drum Track
 
522 preset patterns/1,000 user patterns
 
Patterns created in Sequencer mode can be converted to drum track user patterns
 
Trigger Mode (Immediate, Wait for Keyboard), Sync (On, Off) and Zone (Key and Velocity) settings can be specified.
 
Program selection, 3-band EQ and effect bussing available
 
 KARMA
 
One KARMA module available in Program Mode, four KARMA modules available in Combination and Sequencer Modes, plus Master Control module
 
2,093 preset GEs (Generated Effect)
 
Controllers: ON/OFF, LATCH, MODULE CONTROL, KARMA SLIDERS 1–8, KARMA SWITCHES 1–8, KARMA SCENES 1/5–4/8 (8 scenes).
 
KARMA Wave Sequence, Freeze Randomize, Time Signature Control, Auto RTC (Realtime Control) Setup
 
Controllers
 
CONTROL ASSIGN
 (T1–8, T9–16, INPUTS), REALTIME CONTROL, EXTERNAL, TONE ADJUST, KARMA
Control Surface (8 sliders, 8 switches)
8 Switches:
MIXER… PLAY/MUTE (SOLO)
REALTIME CONTROL=IFX1–5, MFX1, MFX2, TFX on/ off
EXTERNAL=External MIDI control*
TONE ADJUST=Control the Tone Adjust functions
KARMA=KARMA control
 
8 Sliders:
MIXER=Volume
REALTIME CONTROL=Realtime modulation
EXTERNAL=External MIDI control*
TONE ADJUST=Control the Tone Adjust functions
KARMA=KARMA control
 
* In External mode, the eight sliders, eight switches, and eight pads can be used as MIDI controllers, allowing you to control software synthesizers or DAW software via CC settings. 128 setups can be stored (102 are preloaded).
 
8 velocity-sensitive drum pads and chord triggers:
[KARMA ON/OFF]
[KARMA LATCH]
[CHORD ASSIGN]
[DRUM TRACK ON/OFF]
[PAD MODE] - selects velocity-sensitive or fixed-velocity operation
[KARMA MODULE CONTROL]
[RESET CONTROL]
X-Y Control (Display), Hold, Motion
 
 Media
 
Load, Save, Utility, Make Audio CD, Play Audio CD
Data Filer functionality (Save and Load MIDI System Exclusive Data)
 
CD-ROM/R/RW (UDF Format read/write), Record & Play audio CDs (CD-DA), ISO9660 Level 1
 
WAVE file editing functionality
 
CD-ROM/R/RW can be used when a commercially-available USB drive is connected.
 
 Audio Outputs
 
L/MONO, R - 1/4" TS (Mono), unbalanced
 
INDIVIDUAL-1, 2, 3, 4 - 1/4" TS (Mono), unbalanced
 
Output Impedance: 1.1k Ohm stereo; 550 Ohms mono (L/Mono only), Nominal Level: +4.0 dBu, Maximum Level: +16.0 dBu, Load Impedance: 10 k Ohms or greater, Signal to noise ratio: 90 dBu (typical), Dynamic range: 91 dBu (typical)
 
S/P DIF (optical 24-bit, 48 kHz), S/P DIF IEC60958 EIAJCP-1201, provides digital output of the same signals as AUDIO OUTPUT (MAIN) L/Mono, R
 
(Optional) EXB-FW - 6 channels, 24-bit, 48 kHz Sample rate, provides digital output of the same signals as AUDIO OUTPUT (MAIN) L/Mono, R and AUDIO OUTPUT (INDIVIDUAL) 1–4
 
Headphones - 1/4" TRS (Stereo), Output Impedance: 33 Ohms, Maximum Level: 32+ 32 mW @33 Ohms
 
Audio Input
 
 1, 2 - 1/4" TS (Mono), unbalanced
(level switch (MIC/LINE), level knob) - Input Impedance: 10 k Ohms, Headroom:12 dB, Input level range LINE: –29 dBu – +4 dBu or greater (typical),
Input level range MIC: –54 dBu –17 dBu or greater (typical), Source Impedance: 600 Ohms
 
S/P DIF (optical 24-bit, 48 kHz) IEC60958 EIAJCP-1201
 
(Optional) EXB-FW - 2 channels, 24-bit, 48 kHz Sample rate
 
Interface
 
MIDI
 IN, OUT, THRU
 
Computer
2 USB type A hi-speed connectors, supporting 480 Mbps (for storage devices)
 
USB type B connector (for MIDI interface, USB 2.0 supported)
 
2 FireWire ports (when EXB-FW (separately sold option) installed)
 
Keyboard
TO KYBD (for connection to keyboard assembly unit)
 
System Requirements
 
Computer with the KORG USB-MIDI Driver 
 Windows
Microsoft Windows XP Home Edition/Professional Service Pack 2 or later (MIDI Driver for the 64-bit editions is a Beta version), all editions of Microsoft Windows Vista (MIDI Driver for the 64-bit editions is a Beta version), computer supports Windows XP/Vista with USB port (Intel USB Host Controller recommended).
 
Macintosh
Mac OS X 10.3.9 or later, Apple Macintosh with USB ports supports Mac OS X 10.3.9 (PowerPC/Intel-based supported).
 
Please use the latest Korg USB/MIDI driver. 
M3 Editor/Plug-In Editor
 Windows
Windows XP Home Edition / Professional Service Pack 2 or later, Intel Pentium III/1 GHz or faster, 512 Mbyte or larger memory (1 Gbyte or larger recommended.)
After a Vista Compliant version of the application is released, we will perform an operational check.
 
Macintosh
Mac OS X 10.4 or later, G4/800 MHz or faster (Intel-based Mac supported, G5 and/or Core Duo recommended), 512 Mbyte or larger memory (1 Gbyte or larger recommended)
Computer with the EXB-FW
 Windows
Microsoft Windows XP Home Edition / Professional Service Pack 2, computer supports Windows XP with Firewire port.
 
Macintosh
Mac OS X 10.4 or later, Apple Macintosh with Firewire ports supports Mac OS X 10.4 (PowerPC/Intel-based supported).
 
Options
 
EXB-FW 
2 in/6 out digital audio + MIDI FireWire Board
EXB-M256 
256 Mbyte Sample Memory Expansion Board
EXB-RADIAS 
24-voice, 4-part multitimbral RADIAS Synthesizer Board
EX-USB-PCM series 
PCM Expansion USB Memory devices
XVP-10 
EXP/VOL Pedal
EXP-2 
Foot Controller
DS-1H 
Damper Pedal (supports half-damping)
PS-1
Pedal Switch
 
General
 
Keyboard
61-key, 73-key semi-weighted synth action (Korg’s new keyboard design)
 
88-key weighted action (RH3: Real Weighted Hammer Action 3 keyboard with 4-zone graded action response)
 
Controllers
Joystick, Ribbon Controller, [SW1], [SW2]
 
Interface
TO MODULE (for connection to M3-M tone generator module)
 
TO MODULE (second) (available on 73-key and 88-key)
Display
5.7 inch color TouchView™ GUI, 320 x 240 dot, X–Y control function
Control Inputs
Damper Pedal (half damper pedaling supported), Assignable Switch, Assignable Pedal
Common specifications
Frequency response: 20 Hz–20 kHz, +/-1.0 dB, 10 k Ohms load
 
THD+N: 20 Hz–20 kHz, 0.08 % 10 k Ohms load (typical)
 
Included Accessories
Three-Pronged IECC13 Power Cable
(Model D8B5518003B)
Owner’s Manual (M3 Operation Guide)
CD-ROM (M3 Parameter Guide (PDF)
Voice Name List (PDF)
KORG MIDI driver
M3 Editor stand alone and plug-in versions
Bracket (Module only)
 
Dimensions
Module:
26.50"(W) x 7.95"(D) x 3.23"(H)
 
M3-61 and Module:
40"(W) x 14.65"(D) x 4.76"(H) (module down)
40"(W) x 14.65"(D) x 6.73"(H) (module up)
 
M3-73 and Module:
46.81” (W) x 14.60” (D) x 5.15” (H)(module down)
46.81” (W) x 14.60” (D) x 8.14” (H)(module up)
 
M3-88 and Module:
56.10” (W) x 17.40” (D) x 5.15” (H)(module down)
56.10” (W) x 17.40” (D) x 8.14” (H)(module up)
 
Weight
M3-61: 14.1 kg/31.08 lbs
M3-73: 17.3 kg/38.14 lbs
M3-88:26.5 kg/ 58.42 lbs
Module: 10.58 lbs
Current Consumption
35 Watts